Inaba Denko SLIMDUCT Cutter

ID-VD-2100

Best  SLIMDUCT SD line set cover cutter in HVAC industry. 

Concept :-

• Light and slim
• Stainless Blade with advanced corrosion resistance
• Upgrades workability by one-touch open/close
• Supports SLIMDUCT tightly by the fortified high rigidity body
• Ascetic finish and NO swarf

Corresponding duct models :-

• Applicable for SD-77, SD-100
• Instructions: Insert the duct at a 90-degree angle to the blade. Hold the duct straight. Reduce the cutting speed when the blade reaches the third opening.

Specification :-

• Weight 570 gram (1.26 lbs)
• Total length: 310mm (12-1/4″)
• Width: 90mm (3-5/8″)
• Thickness: 18mm (3/4″)

Precautions :-

• Wear safety googles or glasses for your own safety.
• Be careful not to get your fingers caught in the moving parts.
• Keep your fingers and hands away from the blade.
• Do not use the tool for any purpose other than cutting ducts.
• Do not cut any duct apart from the designated size.
• Cut the ducts very slowly or after heating with hot air to avoid cracking at low temperatures.
• The duct edge may be slanted depending on the angle of the cut.
• Do not throw or drop the tool as this will damage the body itself or the blade receiver.

Warnings :-

• Do not touch the blade with your fingers directly since the blade is very sharp. Moreover, wear safety gloves while you use the line set cover cutter or replace the blade.